1980mm trailer axle with brakes
DARO Group produces and sells Wheel Track 1980mm trailer axle with brakes, with maximum load-bearing capacity of 11 tons and axle diameter width of 127mm. It adopts high-quality 20Mn2 high-strength alloy seamless steel pipe. With special thickening treatment, the axle body has higher strength and is perfectly qualified for bearing requirements. Design fully combined with the use of low flat trailer, center of gravity height is lower, better transport stability.
Max. Capacity: 11T
Total length : 2270mm
Wheel Track: 1980mm
Air chamber spacing: 546mm
Axle Tube：127mm
Products Description
Trailer axle with brakes produced and sold by DARO Group has added thermal quenching treatment technology as well as 865 ° C intermediate frequency quenching +480 ° C thermal insulation treatment, which makes the strength and toughness standard and superior performance. The height from the ground is smaller, convenient for heavy goods to get on and off the car, improve the passing of vehicles on the height limit section; For the bearing connection part, adding intermediate frequency strengthening treatment, the axle safety and stability is stronger; The "one-piece" shaft body replaces the traditional "three-piece" welded shaft body, which is more durable, flexural, torsional and fatigue resistant.
DARO trailer axle with brakes wheel end specially designed, smaller hub diameter, with heavy trailer special bearings, brake pads, brake drums and other parts, more stable performance. Primer + top coat double layer anti-rust treatment, anti-corrosion, anti-oxidation, isolation of external erosion, better protect the axle. Online + offline double quality inspection + ultimate performance test, to ensure that the axle provides stable performance in complex environment.
Application Scenario
DARO trailer axle with brakes is applicable to the chassis walking mechanism of all kinds of low flat semi-trailer; it is suitable for the transport of large and unremovable heavy goods, such as heavy vehicles, rail machinery, mining machinery, forestry machinery, engineering machinery, etc., and the hydraulic lifting device on the rear axle is equipped with the lower body height. More convenient for loading and unloading of goods, smooth transportation, strong passability.
Package & Delivery
DARO Heavy Industry Group was founded in 2001, focusing on the research, development and manufacturing of trailer axles and accessories. After years of accumulation, DARO axles has risen rapidly in the commercial vehicle accessories industry with advanced technology and reliable quality, with an annual output of more than 170,000 pieces. Cooperative customers in Asia, Europe, Latin America, the Middle East, Australia, Africa and other more than 50 countries and regions, won the trust of domestic and foreign customers.
