Trailer axle brake Slack Adjuster-manufacture,factory,supplier from China

"Brake king" is a trailer circle almost everyone knows the existence, many owners, especially often run mountain road owners, basically used, the original intention is to make the brake more reliable, to ensure the safety of downhill.The name "brake king" seems to have a little unclear meaning, even if you have not seen the name, a feeling is very strong.

Whether the braking performance is good or not is an important parameter when consumers choose vehicles. In the vehicle braking method, the air brake and the oil brake are two kinds of relatively high utilization rate, today we will talk about the difference between the air brake and the oil brake, and what models are applicable to trailer axle.1.

Disc brake shaft is a vehicle component widely used in passenger cars, relying on calipers to clamp the brake disc to produce friction to achieve braking, because the metal block used in the brake assembly is disk-like, also known as the disc trailer axle.In recent years, with the mandatory promotion of regulations and the influence of the industry trend, the application of disc brake shaft in commercial vehicles is more and more, and gradually shine with the advantages of light weight, sensitive response, smooth braking, good heat dissipation, strong resistance to water attenuation and therma

Drum brake axle is adopted as drum brake axle. drum brake axle has been available for nearly 100 years, but it is still widely used in freight vehicles. Drum Brake Axle is the axle type with the highest proportion in the trailer axle market at present.

The axle is a key component on the chassis of the vehicle, which is connected with the frame through the suspension, and the brake and walking mechanism are installed at both ends.

Disc brake trailer axle, also called disc axle, because of its brake metal block shape is disk/dish named.

Brake failure is a very scary existence in the use of vehicles. For example, the notorious "Tesla brake door" incident recently made many car owners terrified. For semi-trailers that often transport heavy goods, brake failure is equal to disaster. When a fully loaded vehicle suddenly fails to brake at high speed, the consequences are often fatal, and the car crash and death are not exaggerated.But the perfect semi trailer, why can suddenly brake failure in the driving?

With the prevalence of lightweight trends in the freight industry, disc brake axles are becoming more and more popular among car owners. The disc brake bridge does not have a 360-degree wrapped brake drum, and the brake transmission components have also been optimized, so its own weight has obvious advantages.After the introduction of GB7258-2017, it is required that three-axle fences and three-axle grille semi-trailers must be installed with disc brake bridges and air suspension, otherwise it will affect the registration of vehicles.

For car owners, brake failure is a very scary problem. Especially in the process of high-speed driving, once the brake fails, the car crash is not exaggerated. In fact, in the daily process of using the car, through many details, the owner can also judge the problem of the brake system, but these details are easy to be ignored by the owner.1, partial brake.To put it in plain English, when the brake is pressed and the vehicle is about to stop, the steering wheel will always deflect to one side more or less.

How to cool the trailer's braking system is an old topic. When the trailer is carrying goods, the inertia is large, and a few brakes will appear the brake heat.