steerable trailer axle-manufacture,factory,supplier from China

Axle is one of the core components on the rear axle of semi-trailer, and the strength of axle is directly related to the load-bearing capacity of trailer axle. For the axle, the performance of the axle head is crucial.The axle head is the key part of the axle connecting wheel hub, brake drum, bearing and other wheel end components, the performance of the subsequent hub assembly is stable, to a large extent depends on the strength, toughness and accuracy of the axle head.

An axle is a cylinder on a vehicle where two wheels are attached to hold the weight of the vehicle. Each pair of left and right wheels is connected by an axle. Here's a simple example:Above, for example, is a relatively simple axle. Of course, the axle of the semi trailer is much more complex in structure, and is generally installed and used in the way of the axle assembly.

"Semi-trailer", "full trailer", "middle axle trailer", what is the difference between them? How to tell the difference? Next, we will introduce these three types of trailers separately.The semitrailer needs to rely on legs to achieve balance after it is released from the tractorA semi-trailer is a trailer that is pulled by a semi-trailer tractor and bears part of its weight.

The axle is one of the core components on the trailer, and its quality and performance are directly related to the driving safety of the trailer, such as load bearing, braking, maintenance and so on.

As far as the most approved trailer axle on the market goes, disc axle goes. Since the introduction and implementation of the GB7258-2017 National Standard for Vehicle Operation Safety Technical conditions, the three-axle axle and the grille semi-axle have been required to install disc axle axle and air suspension, which, coupled with the gradual prevalence of the lightweight trend in the trailer industry, makes more and more owners turn their attention to Disc Axle.Disc trailer axle is not a new product, but it has been applied more to passenger vehicles in the past.

Due to the different road conditions and axle usage in each region, the maintenance cycle of the DARO drum trailer axle provided below is for reference only.Friction plate inspection: After the axle is driven every three months or 25,000 kilometers and after each disassembly of the hub and wheel, it is mainly to check whether the thickness of the friction plate is normal, the normal thickness of the friction plate is at least 5mm, if it is less than or close to this thickness, it is necessary to seize the time to replace the friction plate to prevent the abnormal braking of the vehicle.Brake d

For trailer drivers, vehicles are tools to make a living and a magic weapon to get rich. The attendance rate and failure rate of vehicles are directly related to the profit and income of the owners. Want to let the vehicle play the maximum value, bring the greatest economic benefits, one is to choose the right model, two is to choose the right parts.Take the trailer axle for example, although it is not as obvious as the body, it is a key part to bear load, ensure braking, maintain running and assist shock absorption.

Under the implementation of the national standard GB7258, the tractor-trailer is also affected by no small amount, in addition to the truck charges to be charged according to the axle, another important standard is that many trailers leave the factory to standard the pallet brake and airbag suspension of the trailer axle.Most of the trailers we are running on the road now are rigid suspension and drum brakes, if the newly registered trailers are all changed to disc brakes and air bag suspension, the cost of car owners will be much higher.Come to Baidu APP to enjoy HD picturesThe picture is dis

With the relevant departments on the semi-trailer load more and more strict supervision, lightweight gradually become the industry's focus. Under the same load limit, the lighter the weight of the trailer itself, the more goods it can load. Therefore, many owners also prefer lightweight trailers or trailer accessories.As we all know, the use of disc trailer axle and air bag suspension, is one of the ways of lightweight trailer. However, in the promotion process of disc axle, it has been questioned a lot.

Generally speaking, the trailer axle is mainly composed of the shaft body, camshaft assembly, brake assembly, shaft end assembly and cotter pin, adjusting arm, various washers, nuts and bolts.1. Total axial bodyIt mainly includes axle body, brake bottom plate, spherical bearing seat, air chamber seat, etc., which is located in the central position of the axle and connects the two sides of the wheel ends.