Hot Sale Trailer axle hub-manufacture,factory,supplier from China

Hub bearing is one of the key components on the trailer, the main role is to carry weight, to provide accurate guidance for the rotation of the wheel end, not only to bear the axial load, but also bear the radial load.Hub bearings require regular maintenance, and the maintenance cycle of different brands also has certain differences. Under normal circumstances, the maintenance cycle of non-maintenance-free hub bearings is 1W km-5W km, and the maintenance cycle of maintenance-free bearings is longer, generally in 10W km-50W km.

The weather is hot in summer, and incidents of vehicle tire blowout or spontaneous combustion often occur, which brings great hidden dangers to driving safety. Hot wheel ends are a common cause of tire blowout or spontaneous combustion, so car owners pay more attention to this.In general, when the truck is running, the wheel end will generate heat accumulation, especially when the vehicle is fully loaded, the wheel end temperature will rise, as long as it does not exceed 60°C, it is a normal phenomenon.

Summer heat like fire, the maintenance of vehicles is also a test, especially freight vehicles, the application conditions are more complex, the vehicle has a flat tire, spontaneous combustion, water tank boiling, wiper aging and other failures of the frequency is relatively higher, not careful is likely to threaten driving safety.As the saying goes, "three points repair seven points maintenance", DARO trailer axle summarizes a summer car overview, simple and easy to use, so that you don't have to spend more money to repair cars.1, improve the frequency of tire pressure inspectio

Car maintenance has always been a topic that card friends are very concerned about and have been hot, and the old drivers must have their own method theory, but the following points you do right?

The trailer loads a lot of weight and has a strong inertial effect, and the pressure on its braking system is relatively high, especially in the face of long downhill or rugged mountain roads that require frequent braking If the pressure is high, it will become hot and hot.

Recently, many places across the country have gradually turned on the summer "barbecue" mode. Under the hot sun, the temperature of the road surface is significantly higher than the air temperature. The tires are affected by thermal expansion and contraction, the tire wall becomes thinner, the heat dissipation efficiency becomes worse, and the probability of tire blowout is higher Higher in other seasons. Once a tire blowout accident occurs, it will cause the vehicle to deflect or tilt instantly, and it is easy to lose control.

Axle is one of the key components on the trailer, is a set of core parts assembly, its performance is directly related to the load bearing, braking and driving of the vehicle. Therefore, the maintenance and maintenance of the axle is crucial to the safety of the operation of the vehicle.In general, trailer axle maintenance mainly includes lubrication grease filling/replacement, fastener detection, brake gap adjustment, brake drum/brake pad inspection, etc.

Axle is one of the core components on the rear axle of semi-trailer, and the strength of axle is directly related to the load-bearing capacity of trailer axle. For the axle, the performance of the axle head is crucial.The axle head is the key part of the axle connecting wheel hub, brake drum, bearing and other wheel end components, the performance of the subsequent hub assembly is stable, to a large extent depends on the strength, toughness and accuracy of the axle head.

Bearing is an important part of the trailer axle. As a high-precision, high-strength and high-speed part, it plays an important role in force transmission, decompression and buffering on the trailer chassis.Specifically, there are three main functions of bearings:1, bearing weight, for the hub of the steering to provide accurate guidance, not only to bear axial load, but also bearing radial load.2, maintain the flexibility of vehicle steering, so that the vehicle steering, the shock absorber can follow the wheel rotation;3. Cushion the vibration from the road surface.

The axle is one of the very important parts on the semi-trailer, which is directly related to the bearing, driving and braking of the vehicle, and the engine and transmission are called the three core assembly of the trailer, which plays a decisive role in the stability and safety of the vehicle.Maintenance-free trailer axle refers to the maintenance and maintenance cycle is relatively long axle, general oil lubrication instead of grease lubrication, in the hub unit with gear oil, so that the hub and oil seal form gear oil storage space, let the bearing soaked in gear oil, to ensure its full l