5k trailer axles-manufacture,factory,supplier from China

The trailer axle is a typical driven axle, its main function is load bearing and auxiliary braking. Compared with the drive steering shaft, the structure of the trailer axle is relatively simple, mainly composed of axle body assembly, brake assembly, wheel end assembly, camshaft assembly and other components.From a structural point of view, common trailer axles are mainly divided into the following types:1. Drum trailer axleThe drum trailer axle is the most widely used trailer axle in the domestic market.

According to different division methods, automobile axles can be divided into many types, such as integral axles and disconnected axles according to structure, and steering axles, drive axles, steering drive axles and support axles according to functions. Among them, the drive axle can be subdivided into single-stage reduction axle (half axle axle) and double-stage reduction axle (wheel side axle, wheel reduction axle).

What is the fatigue test for? Why do trailer axles need fatigue tests? Today, let's walk into the production workshop of DARO Group to take a close look at the work of the fatigue test bench.When choosing an axle, many owners want to understand the basic situation of the product from all aspects, such as strength, toughness, load-bearing force, service life and so on. However, these data are often just a number or adjectival appearance, many owners feel more boring, after reading, listening to no impression.

The axle of a semi-trailer is an important load-bearing component, and its production process directly affects the performance and service life of the axle. The following is the production process of a general semi-trailer axle:1. * * Design phase * *:-Requirement analysis: Determine the load-bearing capacity, dimensions, weight, and other parameters of the axle based on the usage environment and requirements of the semi-trailer.-Design drawings: Use CAD software for 3D design and draw detailed drawings of the vehicle axle.2.

Semi-trailer is a common transport model used in China, which does not have a driving force and needs to be driven by tractor. Trailer axles installed on semi-trailers are generally support Bridges, do not have steering or drive functions, and are designed for load bearing.When it comes to trailer axles, we can easily think of 13t, 16t, 20t axles or 10t light axles, of which 13t axles are the most common.

For a long time, brake safety has been a very concerned issue for car owners. For freight vehicles, the load is usually relatively large, the inertial effect of braking is also relatively strong, especially in the need for continuous braking on the road, the brake often appears hot because of frequent braking. The water-cooled trailer axle is a product for the overheating of the brake.Water-cooled trailer axles first appeared in the public eye about 17 years ago, which was a relatively new invention at that time.

On the afternoon of June 6, a new batch of export trailer axles were successfully loaded and shipped in the Jining factory of DARO Group.It is understood that this batch of trailer axles a total of 58, the amount of 13t, the wheel base of 1840mm, from the factory, will be sent to Thailand via the port of Qingdao, is expected to be delivered to the customer in about half a month.This is the second batch of overseas orders issued by DARO trailer axles this month, the last batch was sent to customers in Russia on June 1 to buy back products, including 9t bearing, 2040mm wheel base trailer rear ax

The trailer loads a lot of weight and has a strong inertial effect, and the pressure on its braking system is relatively high, especially in the face of long downhill or rugged mountain roads that require frequent braking If the pressure is high, it will become hot and hot.

The axle is one of the key parts of the semi-trailer, which is responsible for the load bearing, braking and maintenance of the vehicle. Many owners in the purchase of axles will face a problem: why look similar trailer axles, the price is so much different? Today, let's have a good talk about this topic.First, the choice of raw materials.In fact, no matter what brand of axle, its raw material is basically steel.

With the continuous improvement of vehicle production technology, there are more and more large and small axle brands in the market. Can say which brand qualification old, cost-effective and high, DARO trailer axle is definitely among the best. Especially in many old driver's car, printed "RSCCZ" logo axle is not rare.The product categories are rich to meet the different needs of usersDARO Heavy Industry Group, formerly known as DARO Traffic Machinery Co., LTD., was founded in 2001 and has a history of 20 years.