4000 lb trailer axle-manufacture,factory,supplier from China

Trailer is a type of vehicle that does not have its own driving force, and needs to be powered by a tractor to drive, from a structural point of view, it can be mainly divided into full-mounted, mid-mounted and semi-mounted, of which full-mounted and mid-mounted axles are more common.Full hangingCenter axle typesemi-hangingThe application field of trailer is very wide, warehouse, factory, port, dock, farmland, road, field, etc., almost can see their figure.Due to the different working conditions, the functions of the trailer are also very different.

As far as the most approved trailer axle on the market goes, disc axle goes. Since the introduction and implementation of the GB7258-2017 National Standard for Vehicle Operation Safety Technical conditions, the three-axle axle and the grille semi-axle have been required to install disc axle axle and air suspension, which, coupled with the gradual prevalence of the lightweight trend in the trailer industry, makes more and more owners turn their attention to Disc Axle.Disc trailer axle is not a new product, but it has been applied more to passenger vehicles in the past.

Trailer axle is a typical support bridge, the main role is load-bearing, used to bear the weight of the body, and then can ease road bumps, ensure vehicle braking, maintain vehicle driving, etc., does not have steering or driving function.From the braking mode, the rear axle of semi-trailer can be divided into two types: disc type and drum type.

Trailer is a vehicle that needs to be installed at the back of the tractor and can be used to transport a variety of goods, which is a common transport vehicle for us. In the design and manufacture of trailers, trailer axle is a very important part, and different trailer axle can bear different quality. Below, DARO trailer axle will analyze in detail the difference between 13 tons and 16 tons trailer axle.The difference between 13 tons trailer axle and 16 tons trailer axle1.

The three-line six-axle is a special semi-trailer. Their length, width, and load are different from ordinary semi-trailers. They are commonly known as "crawling all over the ground".

Under the implementation of the national standard GB7258, the tractor-trailer is also affected by no small amount, in addition to the truck charges to be charged according to the axle, another important standard is that many trailers leave the factory to standard the pallet brake and airbag suspension of the trailer axle.Most of the trailers we are running on the road now are rigid suspension and drum brakes, if the newly registered trailers are all changed to disc brakes and air bag suspension, the cost of car owners will be much higher.Come to Baidu APP to enjoy HD picturesThe picture is dis

Semi-trailer is a common type of vehicle in long-distance cargo transportation, which has no driving force of its own, and needs to be connected with the tractor through the traction pin, using the driving force of the tractor to achieve driving.

In the freight industry, trailers can be mainly divided into three types: semi-trailer, full trailer, and central axle trailer. Among them, full trailers and semi-trailers appeared in my country relatively early, and car owners are familiar with them, while central axle trailers Its popularity in China is not high, and car owners have relatively little contact with it.After the update of GB1589, the central axle trailer has become a model encouraged by the policy, and its market popularity has continued to rise.

With the relevant departments on the semi-trailer load more and more strict supervision, lightweight gradually become the industry's focus. Under the same load limit, the lighter the weight of the trailer itself, the more goods it can load. Therefore, many owners also prefer lightweight trailers or trailer accessories.As we all know, the use of disc trailer axle and air bag suspension, is one of the ways of lightweight trailer. However, in the promotion process of disc axle, it has been questioned a lot.

When buying a trailer axle, some owners like to go to the axle factory to visit the field and see the scale and production process of the manufacturer, so as to judge the production level and quality of the manufacturer. For the trailer axle, its main role is to carry the weight of the body, so the stiffness and toughness requirements are higher.So, how does the axle factory ensure the rigidity or toughness of the axle?This also relies on the three major production processes of the axle plant: hot rolling, tempering heat treatment, and medium-frequency strengthening treatment.